Connecting Keypads to the Receiver
To establish a connection between your keypads and the receiver, please follow the step-by-step instructions outlined below for a successful setup.
- Gently press and hold the "#" button until you see that the green light remains lit.
- Next, carefully enter the three-button combination corresponding to the desired number for your keypad. For example, if you are reassigning keypad 3, you would press the buttons 0, 0, and 3 in sequence, ensuring to pause briefly after each press until the green light illuminates. If the process is successful, you will see the green light flash twice to confirm the change.
- To proceed, please launch the Nvolve player application on your PC.
- Select the "Test Keypads" option within the Nvolve Player application.
- Ensure that the Keypad receiver is properly connected and that its green light is illuminated.
- To proceed, select the "Login" option within the Nvolve Player application.
- Press and hold the login button on the Keypad until the light illuminates in green and remains steady.
- To complete the login process, enter the button combination displayed on the Nvolve Player login screen (typically 05). As you press each button, please observe the green light; it should illuminate for every button you successfully press.
- If the process is successful, the light on the keypads will blink twice as a confirmation.
- To proceed with testing, select the "Test Keypads" option and then press any number on the keypad to verify its functionality.